| hh |
Faculty of Engineering &
Technology - Mechanical Engineering
Conference/Conventions/Workshops/Symposium/Seminar
Invited Lecture
| Name of the Speaker |
Topic of Lecture |
Name of the Organiser |
Date |
Prof. Ashoke Kr. Mallick,
IIT, Kanpur |
1.Modelling of Non-linear Isolators
2.Theory of Machnes: Steam Engine to Mechatronics
|
Prof.
K.N. Saha & Prof. G. PohitMechanical Department , JU |
25.12.02
26.12.02
|
| Prof. C. Venkatsan, IIT, Kanpur |
Introduction to Aerosapce/Helicoptre
Engineering : Design of Prototype helicoptres |
28.12.02 |
| 1. National Seminar/Conference (Collaborative) |
| |
a. 16th National Heat and Mass Transfer Conference - January
02; Kolkata; Indian Society for Heat and Mass Transfer.
b. 2nd Indian Congress on Quality, Environment,
Safety Management Systems; 06-08 February, 2003; Kolkata
c. 31st National Conference on Fluid Mechanics
and Fluid Power, to be held in Dec., 16-18, 2004.
|
| 2. International Seminar/ Conference
(Collarborative) |
| |
a. 5th ISHMT/ASME Conference; January 02, Kolkata; American
Society of Mechanical Engineers.
|
| 3. Departmental collaboration |
| |
a. Workshop on Laser Technology; 3 days; February, 02; Mech.
Engg. Deptt., Jadavpur University, Kolkata; AICTE.
b. AUTO CAD Engineering; 12 weeks, March - June,
2002; Jadavpur University, Mechanical Engg. Deptt., Kolkata;
IIPC, J.U
c. Refresher Course on Computer Aided Design;
3 weeks, December, 02-Jan. 03; Jadavpur University, Mechanical
Engg. Deptt., Kolkata; UGC/Academic Staff College, Jadavpur
University.
d. AUTO CADD Engineering for professional
engineers, 12 weeks, April-June, 2003, Jadavpur University,
Mechanical Engineering Department, Kolkata - 700 032, IIPC,
J.U.
e. IOC: 7 weeks Training Program on Petroleum
Engg. Practices for Officers' Trainees 2001, 2003.
f. AICTE: 6 weeks Induction Training Program on Manufacturing,1999.
|
| 4. Papers published / honours or distinctions
received / seminars / symposium / workshop attended by the teachers
of your department |
| |
• S.De and P.K.Nag, Effect of Supplementary
Firing on the Performance of an IGCC Power Plant, Proceedings
of I.Mech.E. Part-A, (In press).
• S.De
and P.K.Nag, Temperature and Gas Concentration Profiles in a
CFB Combustor Burning an Indian Coal, Proceedings of I.Mech.E.
Part-A, (In press).
• S.De
and P.K.Nag, Thermodynamic Analysis of a Partial Gasification
Pressurised Combustion and Supercritical Steam Combined Cycle,
Proceedings of I.Mech.E. Part-A, (In press).
• S.Ray
and A.W.Date, A Calculation Procedure for Solution of Incompressible
Navier-Stokes Equations on Curvilinear Non-Staggered Grids,
Numerical Heat Transfer, Part - B (In Press).
• S.Ray
and A.W.Date, Laminar Flow and Heat Transfer Through Square
Duct with Twisted Tape Insert, International Journal of Heat
and Fluid Flow (In Press)
• S.K.Saha
and D.K.Mahanta, Thermodynamic Optimisation of Solar Flat Plate
Collectors, Renewable Energy, (Published)
• S.
Ghosal and S,K. Som, Ignition Characteristics of Multi-component
Fuel Drop, International Communications. in Heat and Mass Transfer,
(Accepted for publication)
• A.
Karmakar and P.K. Sinha, Impact Induced Dynamic Falure of Laminated
Composite Pre-twisted Rotating Plates, Aircraft Engineering
and Aerospace Technology (In Press)
• Subodh
Kumar Saha "Linseed based fuels for Diesel Engines"
- published in the proceedings of XVI National Conference on
IC Engines and Combustion held on 20-22 January, 2000 at Jadavpur
University, Calcutta. (N)
• Subodh
Kumar Saha"Glass Ceramic Coating An Alternative to Plasma
for Internal Combustion Engine Components" accepted for
publication in the journal of SAE International, USA, 2000.
• D.
Mitra & A. Mazumdar - "Effect of Surface Tension on
Coefficient of Discharge of Weirs" - Indian Journals of
Physics, 74A (3), pp. 227-229. (N)
|
BACK
|
|
